Storage Sizing and Demand Prioritization for Rooftop Rainwater Harvesting
DOI:
Keywords:
Rainwater harvesting; daily water balance; storage sizing; nonpotable demand; supply reliability; demand prioritization.
Abstract
Rainwater harvesting performance depends on the timing of rainfall, available storage, and the demand served, making annual rainfall totals insufficient for design. This paper develops a reproducible daily water balance for a hypothetical 200-square-metre roof supplying nonpotable demand. A constructed 365-day rainfall sequence totals 840 millimetres, and a stated runoff and event-loss model yields 128.64 cubic metres of collectible inflow. Storage capacities from one to twenty cubic metres are compared with a constant daily demand of 0.30 cubic metres. Five cubic metres of storage supplies 79.44 cubic metres annually, corresponding to 72.55 percent volumetric reliability. Doubling capacity to ten cubic metres raises reliability only to 77.11 percent. Redistributing the same monthly rainfall into consecutive wet days reduces five-cubic-metre reliability to 51.14 percent. A reserve rule improves reliability for a designated priority demand while slightly reducing total water supplied. These are deterministic scenario results, not measurements from a building or forecasts for a city. The contribution is a transparent framework that distinguishes total yield, service reliability, overflow, and demand priorities and identifies the observations needed for site specific design.
Downloads
Published
Issue
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

